Antibacterial · Zinc Oxide
Zinc-Oxide Antibacterial Masterbatch (PP)
Antibacterial performance without the yellowing
40% ZnO concentrate, 5–10% masterbatch (2–4% ZnO in the part). ≥90% antibacterial activity (GB/T 31402-2023), ΔE ≤1.5 after 200°C×30 min, tested for the 2027 Chinese appliance standard (GB/T 21551.2-2024).
GB/T 31402-2023, 24 h film-cover, E. coli / S. aureus
The hard metric for yellowing in white parts
Only 5–10% let-down needed
Why do white parts yellow?
ZnO surface sites accelerate oxidation of hindered phenols (e.g. 1010), forming quinone chromophores.
Zinc stearate reacts with phenolic antioxidants, producing grey-green complexes — the "grey" rather than "yellow".
40% filler means high shear heat; once diluted into the part, antioxidant levels are low and the carrier degrades.
Changing the antibacterial agent alone will not fix colour. We work on the stabiliser system, lubrication, interface treatment and processing window together, and we release against ΔE after 200°C×30 min — not initial whiteness.
Typical properties
| Grade | HM-PP/ZnO-40 (private label available) |
|---|---|
| Carrier | PP (MFR 8–20, adjustable to base resin) |
| Active | Nano zinc oxide (ZnO) 40.0 ± 1.0% |
| Let-down | 5.0–10.0% masterbatch (2–4% ZnO in final part); 12.5% for 5% ZnO |
| Antibacterial | ≥90% (GB/T 31402-2023, 24 h film-cover, E. coli / S. aureus) |
| Colour stability | ΔE ≤1.5 after 200°C×30 min (D65, white reference) |
| Moisture | ≤0.15% |
| Appearance | Natural cylindrical pellets, no visible white specks |
| Packaging | 25 kg foil-lined bag |
| MOQ | 25 kg sample · 1 t production (project-dependent) |
Typical values; batch COA and the agreed technical specification prevail. Antibacterial claims require finished-part samples tested by an accredited (CMA/CNAS) laboratory.
Compliance
GB/T 31402-2023 (identical to ISO 22196): 24 h film-cover test; 90% ≈ R 1.0, 99% = R 2.0.
GB/T 21551.2-2024: Chinese appliance antibacterial standard, effective 2027-01-01; requires ≥90% both initially and after decay, mould rating 0–1.
GB 4806.7 / GB 9685: food-contact plastics and additives; overall migration and zinc SML 5 mg/kg.
EU 10/2011: zinc SML 5 mg/kg; nano-ZnO FCM authorisations (1050 / 1046) cover UV-absorber use in polyolefins only.
RoHS / REACH: compliance statements supplied per batch.
FAQ
How much masterbatch should I add?+
The masterbatch contains 40% ZnO. For 2% ZnO in the part add 5.0%, for 3% add 7.5%, for 4% add 10.0%, for 5% add 12.5%. A let-down table ships with every order.
Can you reach 99%?+
Pure zinc oxide typically delivers ≥90% at 3–4% loading with good dispersion. A stable 99% (R≥2.0) needs higher loading or a silver/zinc hybrid. We do not recommend simply adding more: cost and migration risk rise together.
Will white parts yellow?+
This is the usual failure mode of zinc systems: ZnO catalyses phenolic antioxidants and reacts with zinc stearate to form coloured complexes. Our grade is designed for low colour shift — ΔE ≤1.5 after 200°C×30 min, with measured data against a white reference.
Does antibacterial performance fade after washing?+
Zinc systems work by ion release, so performance drops after prolonged washing — that is the nature of the chemistry. We test after water immersion, abrasion and UV ageing per GB/T 21551.2-2024. If the application requires long-term non-fading performance, we recommend a zinc-glass carrier or a silver/zinc hybrid, and we say so upfront.
Is it suitable for food contact?+
It depends on the application. Check ZnO scope and limits in GB 9685, then test overall migration and zinc migration (SML 5 mg/kg) per GB 4806.7. For the EU, nano-ZnO is authorised under EU 10/2011 only as a UV absorber in polyolefins (FCM 1050 / 1046) — that authorisation cannot be cited for antibacterial use.
Start with a 25 kg sample
TDS, let-down table, processing card, and measured antibacterial / ΔE data included. Run one trial on your own white part — colour is decided in the first barrel, not in the datasheet.
Contact sales →