Products›PA6 + 30% GF, Halogen-Free FR (UL94 V-0)
Automotive

HIMING

PA6 + 30% GF, Halogen-Free FR (UL94 V-0)

Typical measured properties are listed below; full TDS available on request.

Automotive

PA6 + 30% GF, Halogen-Free FR (UL94 V-0)

Himing New Material (Zhongshan CSII) Co., Ltd. · IATF 16949 · ISO 9001 · CRCC · Zhongshan, Guangdong · 4 lines, 15,000 t/yr

30% glass-fibre reinforced PA6 with halogen-free V-0 flame retardancy, for automotive and electrical structural parts.

PA6 + 30% GF, halogen-free V-0 — a flame-retardant reinforced nylon for automotive structural brackets, electrical housings and circuit-breaker parts. UL94 V-0 at 1.6 mm; measured tensile 123 MPa, flexural modulus 8,600 MPa, notched impact 9 kJ/m². Samples from 500 kg in 7–10 days, MOQ 1 t — a direct benchmark against imported GF30 FR-PA6 grades.

  • ✓UL94 V-0, halogen-free, at 1.6 mm
  • ✓30% glass fibre, flexural modulus 8,600 MPa
  • ✓Tensile strength 123 MPa, notched impact 9 kJ/m²
  • ✓Density 1.39 g/cm³, ash content 32%
  • ✓Suitable for thin walls and long flow paths
  • ✓Colour and FR system customizable per project
MOQSamples from 500 kg · production from 1 t
Lead timeSamples 7–10 days · production 15–25 days
Packaging
  • ·25 kg woven bags
  • ·500 kg jumbo bags
  • ·Custom packaging
Customization
Colour, FR system, GF content 25–35%, UV and heat-stabilizer packages

Typical properties

Measured · for reference
PropertyValueUnitMethodCondition
Density1.39g/cm³GB/T 103323 °C
Ash content (glass fibre)32%GB/T 9345600 °C
Tensile strength123MPaGB/T 10405 mm/min
Elongation at break2.5%GB/T 104050 mm/min
Flexural strength208MPaGB/T 93412 mm/min
Flexural modulus8600MPaGB/T 93412 mm/min
Charpy notched impact9kJ/m²GB/T 10434 mm, 23 °C
Flame ratingV-0UL94UL941.6 mm

Measured typical values, not a batch-by-batch guarantee. Contractual acceptance follows the agreed TDS and batch COA.

Fits
  • ✓Walls 0.8–2 mm requiring V-0 with stable colour
  • ✓Automotive brackets, electrical housings, breaker/switch parts
  • ✓Projects replacing imported GF30 FR-PA6 on cost or lead time
Does not fit
  • ×Sustained service above 120 °C — use PA66 or PA46
  • ×Notched impact above 15 kJ/m² — use a toughened grade
  • ×Transparent or class-A cosmetic parts
Request a quote →

Grade selection

Which grade fits your part

Like-for-like comparison on the same measured basis. Screen by flame rating first, then trade stiffness against impact.

GradeBaseGFFRTensile MPaFlex modulus MPaNotched impact kJ/m²Typical use
PA6 + 30% GF, FR V-0
This page
PA630%V-01238,6009FR structures, electrical housings
PA66 + 30% GF, structural
PA6630%—1557,20014Under-hood brackets, end caps
PA66 + 35% GF, heavy-duty
PA6635%—1918,71321Rail fastenings, heavy structures
PP, FR V-2
PP—V-222.593562.5Corrugated tubing, lightweight guards

Measured typical values from each grade TDS; test methods are listed on the product page. Not a batch-by-batch guarantee.

Not sure between PA6 and PA66? Read the three-step guide →

Frequently asked questions

Can you supply a UL yellow card or third-party FR report?+
Batch COA and third-party UL94 / glow-wire reports are available. UL yellow card coverage depends on grade and colour and is confirmed per project.
Sampling MOQ and lead time?+
Samples from 500 kg, standard formulation in 7–10 days. Production 15–25 days, MOQ 1 t.
Is a low-warpage or high-flow version available?+
Yes. The glass-fibre system and flow modifier can be adjusted to wall thickness and flow-length ratio; send the part geometry and moulding conditions first.

Need a TDS or a sample?

Tell us the part, the process and the benchmark grade — technical and sales reply within 24 hours with a full quotation.