Products›PA66 + 30% GF, Structural Grade
Automotive

HIMING

PA66 + 30% GF, Structural Grade

Typical measured properties are listed below; full TDS available on request.

Automotive

PA66 + 30% GF, Structural Grade

Himing New Material (Zhongshan CSII) Co., Ltd. · IATF 16949 · ISO 9001 · CRCC · Zhongshan, Guangdong · 4 lines, 15,000 t/yr

30% glass-fibre reinforced PA66 with high flexural strength and heat resistance, for automotive structural parts.

PA66 + 30% GF structural grade — for under-hood brackets, manifold components and motor end caps. Measured tensile 155 MPa, flexural 235 MPa, flexural modulus 7,200 MPa, notched impact 14 kJ/m². Samples from 500 kg in 7–10 days, MOQ 1 t. Tougher than a standard GF30 at the same glass loading.

  • ✓30% glass fibre, tensile strength 155 MPa
  • ✓Flexural strength 235 MPa, flexural modulus 7,200 MPa
  • ✓Notched impact 14 kJ/m² — tougher than standard GF30
  • ✓Density 1.37 g/cm³
  • ✓Suited to under-hood temperature exposure
  • ✓Heat-stabilized / hydrolysis-resistant versions available
MOQSamples from 500 kg · production from 1 t
Lead timeSamples 7–10 days · production 15–25 days
Packaging
  • ·25 kg woven bags
  • ·500 kg jumbo bags
  • ·Custom packaging
Customization
GF content 25–40%, heat stabilization, hydrolysis resistance, laser-welding colours

Typical properties

Measured · for reference
PropertyValueUnitMethodCondition
Density1.37g/cm³GB/T 103323 °C
Tensile strength155MPaGB/T 104050 mm/min
Elongation at break3.5%GB/T 104050 mm/min
Flexural strength235MPaGB/T 93412 mm/min
Flexural modulus7200MPaGB/T 93412 mm/min
Charpy notched impact14kJ/m²GB/T 10434 mm, 23 °C

Measured typical values, not a batch-by-batch guarantee. Contractual acceptance follows the agreed TDS and batch COA.

Fits
  • ✓Under-hood parts at 100–130 °C continuous
  • ✓Brackets, end caps and housings needing stiffness plus impact
  • ✓Components to be laser welded with a matched colour package
Does not fit
  • ×Strong acids or continuous hydrolysis — use a hydrolysis-resistant grade
  • ×Class-A visible surfaces — glass fibre read-through
  • ×Very thin walls (<1 mm) with long flow — evaluate a high-flow version
Request a quote →

Grade selection

Which grade fits your part

Like-for-like comparison on the same measured basis. Screen by flame rating first, then trade stiffness against impact.

GradeBaseGFFRTensile MPaFlex modulus MPaNotched impact kJ/m²Typical use
PA6 + 30% GF, FR V-0
PA630%V-01238,6009FR structures, electrical housings
PA66 + 30% GF, structural
This page
PA6630%—1557,20014Under-hood brackets, end caps
PA66 + 35% GF, heavy-duty
PA6635%—1918,71321Rail fastenings, heavy structures
PP, FR V-2
PP—V-222.593562.5Corrugated tubing, lightweight guards

Measured typical values from each grade TDS; test methods are listed on the product page. Not a batch-by-batch guarantee.

Not sure between PA6 and PA66? Read the three-step guide →

Frequently asked questions

What is the advantage over a standard PA66+GF30?+
Higher flexural strength and notched impact at the same glass loading, for parts needing a stiffness/toughness balance. Tell us the benchmark grade and part for a direct comparison.
Can it be laser welded?+
Laser-transmissive and laser-absorbing colour packages are available; validate on a small batch against your welding process first.
MOQ and lead time?+
Samples from 500 kg in 7–10 days; production 15–25 days, MOQ 1 t.

Need a TDS or a sample?

Tell us the part, the process and the benchmark grade — technical and sales reply within 24 hours with a full quotation.