HIMING
PA66 + 35% GF, Heavy-Duty Structural Grade
Typical measured properties are listed below; full TDS available on request.
PA66 + 35% GF, Heavy-Duty Structural Grade
Himing New Material (Zhongshan CSII) Co., Ltd. · IATF 16949 · ISO 9001 · CRCC · Zhongshan, Guangdong · 4 lines, 15,000 t/yr
35% glass-fibre reinforced PA66 with high modulus and impact, for rail-transit and heavy-duty structures.
PA66 + 35% GF heavy-duty grade — for rail fastening and trackside parts, heavy equipment structures and industrial drive components. Measured tensile 191 MPa, flexural 299 MPa, flexural modulus 8,713 MPa, notched impact 21 kJ/m². Samples from 500 kg in 7–10 days, MOQ 1 t, with batch COA and retained samples for CRCC projects.
- ✓35% glass fibre, tensile strength 191 MPa
- ✓Flexural strength 299 MPa, flexural modulus 8,713 MPa
- ✓Notched impact 21 kJ/m², unnotched 114 J/m
- ✓Density 1.38 g/cm³, ash content 33.5%
- ✓For heavy-duty and rail-transit structures
- ✓Batch COA and retained-sample traceability
- ·25 kg woven bags
- ·500 kg jumbo bags
- ·Custom packaging
Typical properties
Measured · for reference| Property | Value | Unit | Method | Condition |
|---|---|---|---|---|
| Density | 1.38 | g/cm³ | GB/T 1033 | 23 °C |
| Ash content (glass fibre) | 33.5 | % | GB/T 9345 | 750 °C |
| Tensile strength | 191 | MPa | GB/T 1040 | 10 mm/min |
| Tensile modulus | 6302 | MPa | GB/T 1040 | 10 mm/min |
| Flexural strength | 299 | MPa | GB/T 9341 | 10 mm/min |
| Flexural modulus | 8713 | MPa | GB/T 9341 | 10 mm/min |
| Notched impact | 21 | kJ/m² | GB/T 1043 | 4 mm, 23 °C |
| Unnotched impact | 114 | J/m | GB/T 1043 | 4 mm, 23 °C |
Measured typical values, not a batch-by-batch guarantee. Contractual acceptance follows the agreed TDS and batch COA.
- ✓Sustained load with high modulus and low creep
- ✓Rail fastenings, trackside parts, industrial drives and frames
- ✓CRCC projects needing batch traceability and COA
- ×Impact-dominated parts without high stiffness needs — GF30 is more economical
- ×Electrical parts needing CTI or FR certification — separate validation required
- ×Thin, complex flow paths
Grade selection
Which grade fits your part
Like-for-like comparison on the same measured basis. Screen by flame rating first, then trade stiffness against impact.
| Grade | Base | GF | FR | Tensile MPa | Flex modulus MPa | Notched impact kJ/m² | Typical use |
|---|---|---|---|---|---|---|---|
PA6 + 30% GF, FR V-0 | PA6 | 30% | V-0 | 123 | 8,600 | 9 | FR structures, electrical housings |
PA66 + 30% GF, structural | PA66 | 30% | — | 155 | 7,200 | 14 | Under-hood brackets, end caps |
PA66 + 35% GF, heavy-duty This page | PA66 | 35% | — | 191 | 8,713 | 21 | Rail fastenings, heavy structures |
PP, FR V-2 | PP | — | V-2 | 22.5 | 935 | 62.5 | Corrugated tubing, lightweight guards |
Measured typical values from each grade TDS; test methods are listed on the product page. Not a batch-by-batch guarantee.
Frequently asked questions
Can you supply against CRCC projects?+
How do I choose between GF30 and GF35?+
MOQ and lead time?+
Need a TDS or a sample?
Tell us the part, the process and the benchmark grade — technical and sales reply within 24 hours with a full quotation.