HIMING
PP, Halogen-Free FR (UL94 V-2)
Typical measured properties are listed below; full TDS available on request.
PP, Halogen-Free FR (UL94 V-2)
Himing New Material (Zhongshan CSII) Co., Ltd. · IATF 16949 · ISO 9001 · CRCC · Zhongshan, Guangdong · 4 lines, 15,000 t/yr
Low-density PP compound rated UL94 V-2, for automotive corrugated tubing and appliance structures.
Low-density FR-PP for automotive wiring corrugated tubing and appliance internals: 0.93 g/cm³, UL94 V-2, measured tensile 22.5 MPa, flexural modulus 935 MPa, notched impact 62.5 kJ/m². Samples from 500 kg in 7–10 days, MOQ 1 t. Runs on both extrusion and injection.
- ✓Density 0.93 g/cm³ — significant weight advantage
- ✓UL94 V-2, halogen-free
- ✓Notched impact 62.5 kJ/m² — high toughness
- ✓Suitable for extrusion (corrugated tube) and injection
- ✓Tensile strength 22.5 MPa, flexural modulus 935 MPa
- ✓Flame rating and flexibility customizable
- ·25 kg woven bags
- ·500 kg jumbo bags
- ·Custom packaging
Typical properties
Measured · for reference| Property | Value | Unit | Method | Condition |
|---|---|---|---|---|
| Density | 0.93 | g/cm³ | ISO 1183 | 23 °C |
| Tensile strength | 22.5 | MPa | ISO 527-2 | 50 mm/min |
| Flexural modulus | 935 | MPa | ISO 178 | 2 mm/min |
| Charpy notched impact | 62.5 | kJ/m² | ISO 179/1eA | 23 °C |
| Flame rating | V-2 | UL94 | UL94 | corrugated tube specimen |
Measured typical values, not a batch-by-batch guarantee. Contractual acceptance follows the agreed TDS and batch COA.
- ✓Automotive wiring corrugated tubing (extrusion)
- ✓Appliance internal, non-visible parts
- ✓Lightweight battery-pack guards (non-structural)
- ×V-0 at wall <1 mm — needs a different FR package and re-validation
- ×Above 90 °C continuous or load-bearing structure
- ×Visible cosmetic surfaces — flow marks
Grade selection
Which grade fits your part
Like-for-like comparison on the same measured basis. Screen by flame rating first, then trade stiffness against impact.
| Grade | Base | GF | FR | Tensile MPa | Flex modulus MPa | Notched impact kJ/m² | Typical use |
|---|---|---|---|---|---|---|---|
PA6 + 30% GF, FR V-0 | PA6 | 30% | V-0 | 123 | 8,600 | 9 | FR structures, electrical housings |
PA66 + 30% GF, structural | PA66 | 30% | — | 155 | 7,200 | 14 | Under-hood brackets, end caps |
PA66 + 35% GF, heavy-duty | PA66 | 35% | — | 191 | 8,713 | 21 | Rail fastenings, heavy structures |
PP, FR V-2 This page | PP | — | V-2 | 22.5 | 935 | 62.5 | Corrugated tubing, lightweight guards |
Measured typical values from each grade TDS; test methods are listed on the product page. Not a batch-by-batch guarantee.
Frequently asked questions
Can you reach V-0?+
Is it suitable for corrugated-tube extrusion?+
MOQ and lead time?+
Need a TDS or a sample?
Tell us the part, the process and the benchmark grade — technical and sales reply within 24 hours with a full quotation.