Technical services

From a benchmark grade to a formulation you can run: five things we do

The short answer: send the imported grade or your target spec and you get a selection opinion within 24 hours and a benchmark table in three working days. Once confirmed, sampling starts at 500 kg with material in 7–10 days. Formulation, sampling, certification paperwork and moulding troubleshooting sit with one team — no relaying between resin supplier, compounder and test house.

Himing New Material (Zhongshan CSII) Co., Ltd. · IATF 16949 · ISO 9001 · CRCC · Zhongshan, Guangdong

Five services

01

Benchmarking an imported grade

We break the competitor grade or your target spec into comparable property items and re-test on the same standard and the same conditions — a line-by-line difference table, not a tensile-strength headline.

Deliverable: 8–12 item benchmark table with standards and conditions, plus a go / no-go call
02

Custom formulation

Glass or carbon content, FR system, toughening, UV and hydrolysis packages, colour — set by part geometry and process. Thin walls get a halogen-free phosphorus–nitrogen system first.

Deliverable: Formulation proposal, predicted properties, cost band
03

Sampling and scale-up

From 500 kg, validated in a small batch before volume. Every batch keeps a retained sample and a COA, so batch-to-batch variation is traceable.

Deliverable: Sample, COA, retained-sample ID; volume in 15–25 days
04

Certification package

IATF 16949 system documents, the CRCC route including registration support, UL yellow-card application material, batch traceability and COA templates.

Deliverable: Document checklist, approval route, what we need from you
05

Moulding troubleshooting

Fibre read-through, weak weld lines, plate-out and blooming, warpage, hydrolysis embrittlement — diagnosed across material, process and tool, with an ordered list of adjustments.

Deliverable: Findings, process window, formulation change where needed

What you send, what you get, how long

Timings run from receipt of the complete input; tooling or third-party testing is quoted separately.

You provideWe deliverLead time
Benchmark grade or target specFirst selection opinionWithin 24 h
Part geometry, wall thickness, service conditionsBenchmark table and substitution call3 working days
Confirmed grade and quantitySample and COA7–10 days
Moulding trial resultsProcess adjustment or formulation revision3–5 working days
Volume orderDelivery with batch COA15–25 days

How a project runs

  1. 1 · Brief. Part drawing, current grade or spec, service conditions (temperature, media, life), certification requirements.
  2. 2 · Benchmark. A direction in 24 hours, a benchmark table and substitution call in three working days. If substitution is a bad idea we say so.
  3. 3 · Sample and trial. From 500 kg with COA and retained sample; process or formulation adjusted against trial results.
  4. 4 · Volume and traceability. Delivered in 15–25 days with batch retained samples and COA; certification packages prepared in parallel.

Questions buyers ask

How complete is the benchmark table?+
Eight to twelve key properties, each with test standard, test conditions, our measured value and the competitor’s published value. Where we cannot obtain measured data for a competitor item, it is marked "published / unverified" — we do not pad measured columns with estimates.
Is sampling charged?+
The 500 kg minimum sample is charged at material price and can be credited against a volume order by agreement. Tooling or special colour matching is quoted separately.
Can you support our CRCC certification?+
Yes. Grades inside Himing’s own CRCC scope ship directly; for projects outside it we prepare the material package and support the registration route. The issuing body and the timeline are set by the certification centre — we do not promise dates we do not control.
Can you diagnose a moulding problem remotely?+
Usually. Send the part drawing, defect photos, process parameters (melt and mould temperature, injection speed, hold pressure) and the material batch; we return an ordered diagnosis. Fracture morphology or composition questions need third-party SEM/FTIR before we commit to a conclusion.

Send the part and the benchmark grade

A selection opinion within 24 hours. NDA signed first if confidentiality is required.