Application · Rail transit

Rail fastening systems: pass CRCC first, then talk properties

The short answer: the mainstream material for high-speed and heavy-haul fastening systems is PA66 + 30% GF, qualified across -40 to 80 °C, 1,000 h salt spray and a 20-year design life. CRCC certification is the entry ticket; mechanical properties are the second gate. For sustained-load, heavy-duty parts, PA66 + 35% GF buys modulus and creep resistance.

Himing New Material (Zhongshan CSII) Co., Ltd. · IATF 16949 · ISO 9001 · CRCC · Zhongshan, Guangdong

1. Six requirements on the material

Approval comes first, properties second — the reverse order wastes a validation cycle.

RequirementTargetWhat it drives
ApprovalCRCC certification (China Railway Test & Certification Center)An uncertified grade cannot enter the rail supply chain directly
Temperature-40 to 80 °C service windowLow-temperature notched impact is the deciding property on northern lines
Corrosion1,000 h salt spray, no corrosionCoastal and de-icing-salt environments
Life20+ year design lifeMatched to the fastening system, not the part alone
FatigueLong-term cyclic loadRequires low creep and stable fibre dispersion
InsulationPer system requirementTrack-circuit sections constrain volume resistivity

2. Three sourcing routes

Imported grade via an agent

Mature data package and documentation; higher price, 8–12 week lead time, and CRCC access depends on the agent or a customer’s certificate.

CRCC-certified domestic grade (recommended)

Direct entry into the supply chain, typically 20–25% lower price, 15–25 day lead time. Verify the certificate scope and batch consistency.

Uncertified domestic grade

Only for non-rail applications, or via the registration route. On a fixed programme the registration cycle usually costs more than the material saving.

3. Four checks before substituting an import

  1. Dry tensile and flexural modulus on the same standard and test speed — do not mix data from different rates.
  2. Notched impact at -40 °C — the deciding number for fastenings; the 23 °C value is not a substitute.
  3. HDT at 1.8 MPa — sets the long-term thermal margin.
  4. Property retention after 1,000 h salt spray / ageing — decides whether a 20-year life claim holds.

Comparing dry tensile strength alone is the most common cause of a failed substitution.

5. Questions buyers ask

Can an uncertified PA66+GF30 be used in rail fastenings?+
Not directly. CRCC certification is issued per product and per manufacturing site. An uncertified grade usually has to be registered through an agent or under a customer’s existing certificate. Confirm the certificate scope before discussing properties.
Can a Chinese PA66+GF30 replace Lanxess Durethan BKV30?+
On dry mechanical properties, yes — equal or slightly better. The real difference is the approval route and batch consistency. Benchmark on the same standard across four items: tensile and flexural, notched impact at -40 °C, HDT, and property retention after 1,000 h salt spray. A CRCC-certified domestic grade enters the chain directly and skips the agent route.
Why is low-temperature impact the make-or-break property?+
Fastenings must take installation and dynamic train loads at -40 °C, where PA66 notched impact drops sharply. Higher glass content and weaker toughening increase brittle-failure risk — use the measured -40 °C value, never the 23 °C figure.
GF30 or GF35 for fastening parts?+
GF35 for structural parts governed by stiffness, creep and sustained load; GF30 where low-temperature impact and flow matter. Both are used in rail systems; the fastening assembly’s load case and validation decide.

Send the part and the project requirement

A material and approval-route recommendation within 24 hours; samples from 500 kg in 7–10 days.